Name tag :on, Setting name tag (pop id) – Uniden XSA1255 User Manual

Page 16

You must subscribe to Caller ID service through your local telephone provider to use this feature.

1) When the phone is in standby mode, press and hold the

caller id/menu key.

2) Press the /vol/ key to select CIDCW.

3) Press the select/remote key (XSA1255) or the

select/channel key(XSA1255+1) to toggle and turn on
Caller ID on Call Waiting.

4) Press the end key and return the handset to the

main base to complete the setting. The handset returns
to standby mode.

Setting Name Tag (POP ID)

The Name Tag feature works with the Caller Display number from Caller ID. You must subscribe to
Caller ID service through your local telephone provider to use this feature. There is usually a fee for this
service. When the phone rings the caller display number, when received will be compared to numbers
stored in the dial memory. If there is a match any name stored with the dial memory number will be
displayed (see page 23).

1) When the phone is in standby mode, press and hold the

caller id/menu key.

2) Press the /vol/ key twice to select Name Tag.
3) Press

the

select/remote key (XSA1255)or

the select/channel key(XSA1255+1) to toggle and turn
Name Tag on or off.

4) Press

the

end key or return the handset to the cradle to

complete the setting. the handset returns to standby.

[15]

Name Tag :On

This manual is related to the following products:

XSA1255+1