Uniden XSA1255 - Manual (Page 34)

Setting Up Your Answering System
Answering System Settings
To set the following six functions you must enter the menu mode.
! To scroll through the menu options, repeatedly press the
menu/clock key in standby mode. The system returns to
standby after the last menu option. You hear a confirmation
tone to indicate standby mode.
! If any of the following occurs during menu setup, the system
returns to standby; you will have to start over with the
procedure you were performing.
-The talk/flash key is pressed
-The (play/stop) key is pressed
-10 seconds elapse without a key press
-An incoming call is received
! If the system remains idle for up to ten seconds after the
announcement, the system returns to standby. Once the or
/ volume/select key is pressed, the idle time is extended to
10 seconds.
! For your
convenience,
voice prompts will
guide you through
the menu mode.
! After the setting,
press the
(play/stop)
key to exit the menu
mode, or the menu/
clock key to move
to the next menu
option.
[33]