Uniden XSA1255 - Manual (Page 35)

Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to the base.
Follow these steps to set the clock to the correct time.
1) With the phone in standby mode, press the menu/clock
key. The system announces “Time,” the current time and the
guidance for setting the time.
2) Press the or /volume/select key until the correct day
is announced. The numbers [ ] through [ ] are
displayed on the base.
3) Press the set key to select the day.
4) Press the or /volume/select key until you hear the
correct hour setting. The numbers [ ] through [ ] are
displayed on the base.
5) Press the set key to select the hour.
6) Press the or /volume/select key until you hear the
correct minute setting. The numbers [ ] through [ ]
are displayed on the base.
! Normally, the
system will return
to standby if it
remains idle for 10
seconds after the
or /volume/
select key is
pressed. For
setting the time,
however, the idle
time is extended to
two minutes.
! Press and hold the
or /volume/
select key to
quickly scroll
through the
numbers on the
display.
rrrrrr
[34]
T
H
E
IN
T
E
G
R
A
T
E
D
A
N
S
W
E
R
IN
G
D
E
V
IC
E