Uniden DSS3450 - Manual (Page 19)

[19]
Basic Setup
Setting the Day and Time
Note: If you don't press any keys for two minutes
when setting the day and time, the phone exits the
menu.
[menu/clear]
[select/ ]
[select/ ]
[select/ ]
[select/ ]
To change the day and time shown in the display, follow
the steps below.
1. Press . Select the GLOBAL SETUP menu, and then the
DAY & TIME submenu option.
2. Move the cursor to select the day of the week, and then press .
3. Move the cursor to set the hour, and then press .
4. Move the cursor to set the minute, and then press .
5. Move the cursor to choose AM or PM, and then press . You will hear a confirmation tone.
Changing the Dial Mode (Australian Model Only)
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These
days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If
your phone company uses pulse dialing, you will need to change your phone’s dial mode. If you don't get a dial tone
or can't connect to the telephone network, please follow the steps below to modify your phone’s settings:
1. Press . Select the GLOBAL SETUP menu, and then the
DIAL MODE submenu.
2. Scroll to select PULSE.
3. Press . You will hear a confirmation tone.
If you ever need to change the dial mode back to tone dialing, follow the
same procedure, but select TONE in step 2.
[menu/clear]
[ ]
[select/ ]