beautypg.com

Screening calls, Turning off the message alert tone, Dialing in to your answering system – Uniden DECT3080 User Manual

Page 50: Away.from.home, Setting a security code or personal identification, Number.(pin), Dialing.in.to.your.answering.system

background image

49

Using the

Answering

System

50

Screening Calls

From the base

From the handset

While.the.system.is.taking.the.message,.simply.

listen.to.the.caller.over.the.base.speaker..(You.

need.to.activate.the.base.call.screen.feature.in.

advance..See.page.46.).

To.mute.the.call.screen.and.allow.the.caller.to.

continue.leaving.the.message,.press.

[

].

While.the.systems.is.recording.the.message,.press..

[ /mute]..If.another.handset.is.screening.a.call,.you.will.

hear.a.beep.and.you.will.not.be.able.to.screen.the.call.

To.answer.the.call.and.speak.to.the.caller,.press.

[ /flash].

To.mute.the.call.screen.and.allow.the.caller.to.continue.

leaving.the.message,.press.

[ ].or.return.the.handset.to.the.

cradle.

Turning Off the Message Alert Tone

When.all.new.messages.are.played.back,.the.message.alert.tone.will.automatically.deactivate..The.tone.will.not.

deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.tone,.press.any.key.on.the.base.

Operating the Answering System While You Are Away from Home

When.you.are.away.from.home,.you.can.operate.your.answering.system.with.any.touch-tone.telephone.

Setting a security code or Personal Identification Number (PIN)

To.operate.your.answering.system.when.you.are.away.from.home,.you.will.need.to.enter.a.two-digit.security.code.or.

Personal Identification Number (PIN). The default security code is 80.

Press.

[Select/menu]..

Select.the.ANSW..SETUP.menu,.and.then.the.SECURITY.CODE.submenu.
Use.the.number.keypad.(

[0].through.[9]).to.enter.a.two-digit.security.code.(0-99).

Press.

[Select/menu]. You will hear a confirmation tone.

Dialing in to your answering system

Note:. If.you.enter.an.incorrect.security.code/PIN.three.times,.you.will.hear.a.beep.and.the.answering.system.will.

return.to.standby.

)
2)
3)
4)