Uniden DECT3080 - Manual (Page 39)

38
Finding a Lost Handset
Using Hold, Conference and T
ransfer
Finding a Lost Handset
To.locate.a.misplaced.handset,.press. [find].on.the.base.when.the.phone.is.in.standby..The.handsets.connected.to.
the.paging.base.will.beep.for.one.minute,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.
[find].again.or.any.key.on.the.found.handset.
Note:.. . Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
During.a.call,.press. [Int’com/clear].to.place.the.caller.on.hold..If.you.leave.a.caller.on.hold.for.more.than.ten.
seconds,.the.display.screen.will.read,.LINE.ON.HOLD.
To.return.to.the.party.on.hold,.press.
[ /flash].or.[ ]..The.phone.will.return.to.the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected.and.the.phone.will.return.to.standby.
. •.While.a.call.is.on.hold,.Call.Waiting.and.CID.on.Call.Waiting.do.not.work..
Conferencing
If.you.have.more.than.one.handset,.up.to.three.people.can.
participate.in.a.conference.call..A.three-way.conference.call.
consists.of.an.outside.line.and.two.handsets..You.can.easily.
join.a.call.already.in.progress..The.handsets.must.be.currently.
connected.to.the.same.base.(see.page.4).
Press. [ /flash].or.[ ].to.join.the.call.
To.hang.up,.return.the.handset.to.the.cradle.or.press. [ ]..
The.other.party.will.still.be.connected.to.the.call.
)
2)
)
2)
Outside call
Handset #1
Handset #2