beautypg.com

Using multiple bases, Registering the handset to another base – Uniden DECT3080 User Manual

Page 14

background image

3

Installing the Phone

4

If.the.display.shows.REGISTRATION.FAILED,.repeat.the.process.again.
Note:. If.a.handset.has.ever.been.registered.to.a.base,.reset.the.handset.before.you.register.it.to.a.new.base.(see.

Resetting.the.Handset.on.page.55)..Or.to.use.multiple.bases,.see.the.next.section.

Using Multiple Bases

The.handsets.supplied.with.your.phone.(or.any.DCX300.accessory.handsets).can.be.registered.to.a.total.of.four.

different.bases..Compatible.bases.include.the.DECT2060,.DECT2080,.DECT2085,.DECT2088,.and.DECT3080.

models..Once.your.handset.is.registered.to.more.than.one.base,.you.can.set.the.handset.to.search.automatically.the.

available.base,.or.you.can.select.manually.which.base.the.handset.should.connect.to.(for.example,.if.you.have.one.

base.with.an.answering.machine,.you.can.tell.the.handset.to.connect.that.base.to.check.messages)..
Note: To confirm how many bases the handset is registered to, open the SELECT BASE submenu (follow the step

.of.Selecting.the.base.on.page.4)..Press.

[ ].to.close.the.list.and.return.to.standby.

Registering the handset to another base

Make.sure.the.handset.battery.is.fully.charged.
To.register.a.handset.to.DECT2060.,.DECT2080.or.DECT3080.base:

Disconnect.the.base.AC.adapter..Then.press.and.hold.

[find hs].or.[find].while.you.reconnect.the.adapter..

Keep.pressing.

[find hs].or.[find].until.the.charge.LED.starts.to.blink.

To.register.a.handset.to.DECT2085.or.DECT2088.base:

With.the.phone.in.standby,.press.

[Menu/Select].on.the.base..Move.the.cursor.to.select.the.REGISTER.

HANDSET.menu,.and.then.press.

[Menu/Select]..HANDSET.REGISTERING.will.appear.

On.the.handset,.press.

[Select/menu]..Select.the.REGISTER.BASE.menu..HANDSET.REGISTERING.will.

appear.in.the.display..(After.step.2,.you.have.thirty.seconds.to.complete.this.step.3.before.the.system.returns.to.

standby.)
Wait.approximately.thirty.seconds..“REGISTRATION.COMPLETE”.will.be.displayed.to.indicate.the.handset.has.

been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.

If.the.display.shows.REGISTRATION.FAILED,.repeat.the.process.again.

)
2)

3)

4)