Uniden DECT3080 - Manual (Page 40)

39
Using Hold, Conference
and T
ransfer
Transferring a Call
You.can.transfer.a.call.from.one.handset.to.another..The.handsets.must.be.currently.connected.to.the.same.base.
(see.page.4).
During.a.call,.press. [Int’com/clear].
Use. [ ].or.[ ].to.select.the.handset.you.want.to.transfer.the.call.to,.and.then.press.[Select/menu]..Select.ALL.
to.page.all.other.handsets..The.call.will.automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.cancel.
the.transfer,.press. [ /flash].or.[ ].
When.another.handset.accepts.the.transferred.call,.you.will.be.disconnected..If.you.want.to.rejoin.the.call,.press..
[ /flash].or.[ ] again.
Answering a transferred call
When.a.handset.receives.a.call.transfer,.it.sounds.a.paging.tone;.handsets.also.show.the.ID.of.the.handset.that.is.
paging..To.accept.the.call.transfer:
To.answer.the.page.and.speak.to.the.transferring.handset,.press. [ /flash].or.[Int’com/clear].
Note:..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.
cradle..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.handset’s.dial.pad.
To.accept.the.call.and.speak.to.the.caller,.press. [ /flash].on.the.receiving.handset.
When.you.accept.the.transferred.call,.the.transferring.handset.will.be.disconnected.
Only the first handset.to.answer.the.transfer.page.will.be.connected.to.the.call..If.the.transfer.page.is.not.picked.up.
within.one.minute,.the.operation.will.be.canceled.
)
2)
3)
)
2)
3)