Flip the latch down towards the suction cup – Univex TRAX353 User Manual
Page 13
Page 13
How Do I Put It in My Car?
Hold the disk
4)
exactly above the spot where you want to glue it down.
(Remember, the glue is designed to be permanent!)
Press the disk firmly against the surface. Push down along the
5)
edges, too, so that every part of the disk makes good contact with the
surface.
Before you install the windshield mount, gently tug on the disk to make
6)
sure it’s secure.
7) Remove the clear plastic sheet
from the top of the anchor disk.
Press the suction cup flat against the
8)
anchor disk, then push the suction latch
down (towards the suction cup) to lock
it into place.
Flip the latch
down towards
the suction cup