Uniden XSA660 - Manual (Page 28)

22
A second tone sounds after the preset message plays, and the Answering
System automatically returns to Standby.
3. To select your recorded message again, press ogm .
The preset message will begin to play on the Base Unit speaker.
4. While the preset message is playing, press ogm again.
A tone will sound, and your recorded message will play on the base Unit
speaker. A second tone sounds after your message plays, and the Answering
System automatically returns to Standby.
Setting the Toll Saver Switch
The switch allows you to set the number of
rings the caller hears before your Answering
System answers. You can set the switch to
answer after 2 rings or after 4 ring. In the TS
(Toll Saver) position, the Answering System
answers after two rings if you have messages
recorded, and it answers after four rings if
there are no new messages. So if you call
long distance to check your messages, you
can hang up after the second ring and not be billed.
For the New Zealand Model,
when in the TS (Toll Saver)
position, the answering
system answers after six (6)
rings if there are messages
and nine (9) rings if there
are no new messages.