Uniden XSA660 - Manual (Page 14)

8
1. Plug the AC adaptor cord into the 9V DC input jack on the base.
2. Wrap the AC adaptor cord inside the molded strain-relief.
3. Plug one end of the long telephone cord into
the TEL LINE jack on the base.
4. Plug the other end of the telephone cord into
the telephone wall jack. (remember, the phone
must be fully charged before you can use it.)
5. Plug the AC adaptor into a standard 240V AC
wall outlet.
6. Fully extend the antenna on the base.
Wall Installation
Setting the handset Retainer for Wall mounting
1. Remove the handset retainer on the by base
sliding it upward.
2. Rotate the retainer 180˚ and flip over so the
tab is facing up.
3. Slide the retainer back onto the base.
AC
Adaptor
Line in
From
Telephone
Jack
1 3
2
4
5
DESK OR TABLETOP INSTALLATION
Use only the AC adaptor that
came with the phone.
Use only the AC adaptor that
came with the phone.