Universal Remote Control (URS) Remote control HCCUR - Manual (Page 9)

U
SING
AUX
TO CONTROL A
S
ECOND
TV, VCR, C
ABLE
B
OX
OR
S
ATELLITE
R
ECEIVER
The AUX button is normally used to control an audio
component, but it can also be configured to control a
second TV, VCR, cable box or satellite receiver.
1. Turn on the equipment you want to control.
2. Press and hold SETUP until the LED
indicator lights steadily. Release Setup
button.
3. Press the AUX1 or AUX2 button.
4. Press and release the mode button that
matches the A/V equipment you want to
control. The LED blinks once.
5. Enter the 3 digit Code from the Code List.
The LED turns off after the last digit
entered.
6. Point the remote at your audio
component and press the POWER button.
Your audio component should turn off.
7. Turn your audio component on and press
CHANNEL +. If it responds, setup is
complete.
9
DI-000-HCCUR-00A 7/5/02, 2:19 PM 9