Universal Remote Control (URS) Remote control HCCUR - Manual (Page 11)

I
DENTIFYING
C
ODES FOUND USING THE
S
EARCH
P
ROCEDURE
1. Press and hold the SETUP until the LED
indicator lights steadily. Release Setup
button.
2. Press the mode button that matches the
equipment you want to identify. The LED
blinks once.
3. Press and release SETUP. The LED blinks
once.
4. To find the first digit, press each number
button from 0 to 9 until the LED blinks. The
number you pressed is the first digit of the
code.
5. Press each number button from 0 to 9
again as above to find the second digit.
6. Press each number button in turn to find
the third digit. When the third digit has
been found, the LED goes out.
11
DI-000-HCCUR-00A 7/5/02, 2:19 PM 11