Uniden ANA 9610 - Manual (Page 20)

1. Insert two mounting screws 3
#
$
inches apart. Allow about !
$
of an inch between the wall
and screw heads for mounting
the phone.
2. Plug and secure the AC Adapter cord by following steps 2 and
3 of the Standard Wall Plate Mounting.
3. Plug one end of the telephone
line cord into the LINE jack on
the Base Unit. Optionally, plug
one end of a standard 2500
type desk phone into the
PHONE jack. Then place the
telephone cord(s) inside the
molded channel(s) on the
bottom of the Wall Mount
stand.
4. Place the Base Unit on the
posts of the wall screws and
push down until it’s firmly
seated.
14
3/16 in.
3 15/16 in.
P:\ana9610e\9610usae.vp
Mon Aug 30 10:26:07 1999
Color profile: Disabled
Composite Default screen