Setting channel attenuation (conventional, Setting channel modulation, Conventional channels only) – Uniden BC246T User Manual

Page 76: Setting channel attenuation, Programming/editing optional settings

background image

76

Programming/Editing Optional Settings

Setting Channel Modulation

(Conventional Channels Only)

program system

E

Select the system

E

Edit Group

E

Select the group

E

Edit Channel

E

Select the channel

E

Set Modulation

E

This setting controls the demodulation method used for
the channel. Select your setting, then press E.

Auto

- the scanner uses the default modulation for the

frequency (see the table at the front of the manual).

AM

- the scanner uses AM (amplitude modulation) for the

frequency.

FM

- the scanner uses FM (frequency modulation) for the

frequency.

NFM

- the scanner uses narrowband FM for the

frequency.

Note: The default setting is AUTO.

Setting Channel Attenuation

(Conventional Channels Only)

program system

E

Select the system

E

Edit Group

E

Select the group

E

Edit Channel

E

Select the channel

E

Set Attenuator

E

This setting controls whether the scanner attenuates

signals on this channel. Select your setting, then press E.

Menu

Menu