Setting system lockout, Setting the system hold time, Programming/editing optional settings – Uniden BC246T User Manual
Page 63
63
Programming/Editing Optional Settings
Edit Sys Option
E
Set Quick Key
E
After selecting this option, press 0-9 to assign the system
to a quick key or press No to assign the system to no
quick key, then press E.
Hints:
• You can assign as many systems to the same quick
key as you want.
• Preprogrammed systems are set to quick key 9.
• To be scanned, a system’s quick key must be
activated and the system must be unlocked.
Setting System Lockout
program system
E
Select the system
E
Edit Sys Option
E
Set Lockout
E
This setting controls whether the system is scanned when
its quick key is enabled. Rotate the scroll control to select
your setting, then press E.
Locked
- the system is not scanned
Unlocked
- the system is scanned
Note: You can also lock or unlock a system by pressing
, selecting the system, then pressing
+ L/O.
Setting the System Hold Time
program system
E
Select the system
E
Edit Sys Option
E
Set Hold Time
E
This setting controls how many seconds the scanner
scans a system before moving to the next unlocked
system. Enter a value from 0-255, then press E to save
the setting.
Menu
Func
Func
Menu