Setting channel alert, Setting channel priority (conventional chan, Setting channel priority – Uniden BC246T User Manual
Page 74: Conventional channels only), Programming/editing optional settings
74
Programming/Editing Optional Settings
Setting Channel Priority
(Conventional Channels Only)
program system
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
E
Select the channel
E
Set Priority
E
This setting controls whether the scanner treats the
channel as a priority channel while scanning. Select your
setting, then press E.
On
- when you turn on the Priority feature, the channel will
be scanned every 2 seconds. P appears at the end of the
default name.
Off
- the channel will not be treated with priority.
Note: The default setting is Off.
Setting Channel Alert
program system
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
E
Select the channel
E
Set Alert
E
This setting controls whether the scanner will alert you
when the channel becomes active. Select your setting,
then press E.
On
- the scanner beeps when the channel becomes active.
Off
- no alert sounds.
Menu
Menu