Uniden UH044DP - Manual (Page 19)

UNIDEN Model UH044DP DELUXE PACK UHF CB Radio
OPERATION
DROP-OUT DELAY
KEYPAD CONFIRMATION
TONE
While scanning, the stops at a busy channel and
receives a transmission. When the received signal is over, the
unit will wait for 3 seconds for the return of the signal, otherwise,
the radio resumes scanning.
Assures the user that the keypad has
been properly pressed by emitting a
beep tone. This tone can be switched
on or off.
1. Press and hold button for 1
sec will appear for 1.5
secs and you will hear a beep
sound.
2. Press and hold button for 1
sec will appear for 1.5
secs.
UH044
Battery Save feature extends the battery life by switching the
receiver circuit power ON and OFF. This feature automatically
activates during stand by mode (RX mode without signal). It
turns OFF automatically when a signal is present, and activates
again after channel inactivity.
“bp on”
“bp of ”
POWER SAVE
18