Uniden UH044DP - Manual (Page 13)

UNIDEN Model UH044DP DELUXE PACK UHF CB Radio
12
OPERATION
SELECTING A CHANNEL
TO TRANSMIT AND RECEIVE
Press or to select the desired
channel.
If you press and hold the
or channel numbers
will scroll rapidly.
The UH044 uses the 40 UHF-CB Channels. For your reference
a list of the available channels and corresponding frequencies is
printed on page 20. (Channels 22 and 23 are for telemetry and
telecommand applications. Transmit should be avoided on these
channels).
1. The maximum RF transmit power
of UH044 is 2 Watts.
2. Before you transmit, listen for
activity on the selected channel.
3. When the channel is clear, press
and hold the to transmit.
appears on the LCD.
Hold the radio with microphone approximately 5 cm in front of
your mouth with the antenna at approximately 45° angle away
from your head. Speak in a clear, normal conversational voice.
4. When you have finished
speaking, release the and
listen for a response then
disappears on the LCD.
appears while receiving a signal.