Uniden DECT2035+2 - Manual (Page 50)

50
Using the
Answering
System
Screening Calls
From the base From the handset
While the system is taking the message,
simply listen to the caller over the base
speaker. (You need to activate the base call
screen feature in advance. See page 46.)
To mute the call screen and allow the caller
to continue leaving the message, press
.
•
•
While the systems is recording the message, press
/MUTE. If another handset is screening a call, you will hear a
beep and you will not be able to screen the call.
To answer the call and speak to the caller, press TALK/FLASH.
To mute the call screen and allow the caller to continue leaving
the message, press END or return the handset to the cradle.
•
•
•
Turning Off the Message Alert Tone
When all new messages are played back, the message alert tone will automatically deactivate. The tone will not
deactivate until all new messages are played back. To quickly turn off the tone, press any key on the base.
Operating the Answering System While You Are Away from Home
When you are away from home, you can operate your answering system with any touch-tone telephone.
Setting a security code or Personal Identifi cation Number (PIN)
To operate your answering system when you are away from home, you will need to enter a two-digit security code or
Personal Identifi cation Number (PIN). The default security code is 80.
Press MENU/SELECT.
Select the Ans. Setup menu, and then the Security Code submenu.
Use the number keypad (0 through 9) to enter a two-digit security code (00-99).
Press MENU/SELECT. You will hear a confi rmation tone.
Dialing in to your answering system
Note: If you enter an incorrect security code/PIN three times, you will hear a beep and the answering system will
return to standby.
1.
2.
3.
4.
DECT 2035+1 OM.indb 50 DECT 2035+1 OM.indb 50 15/7/08 12:00:38 PM 15/7/08 12:00:38 PM