Uniden D1660 - Manual (Page 9)

English - 9
Using Call Waiting
♦ Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
♦ If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received from the waiting call. Press Talk/Flash to switch
between the current call and the waiting call; each time you switch, there
is a short pause before you're connected to the other call.
Using the Phonebook
The phone can store up to 100 entries in its phonebook. All handsets share
the same phonebook, so only one handset can access it at a time.
To... Press...
open/close the phonebook PhonEbook .
scroll through the entries
down to scroll through the entries from A to Z.
uP to scroll from Z to A.
jump to entries that start
with a certain letter
the number key corresponding to the letter
you want.
dial the current entry Talk/Flash or sPEakEr .
edit the current entry MEnu/sElEcT , then select Edit .
delete the current entry
MEnu/sElEcT , then select Delete . When the
phone prompts you to confirm, select Yes .
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press MEnu/sElEcT and select
Create New. Enter a name & number and select a personal ring.
♦ Enter the phone number (up to 20 digits) exactly as you would dial it.
♦ If you need the phone to wait before sending the next set of digits, press
rEdial/PausE to insert a 2-second pause. You can insert multiple pauses, but
each one counts as a digit (you’ll see P in the display).
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Press MEnu/sElEcT and select
Delete All . When the phone prompts you to confirm, select Yes .
USING SPECIAL FEATURES
Silent Mode
You can silence the ringers on all handsets for a specific period of time.