Uniden D1660 - Manual (Page 12)

English - 12
messages with one key touch. Contact your voice mail provider for more
information.
Setting the Voice Mail Tone
The voice mail feature supports both Stutter Dial Tone (SDT) and
Frequency-Shift Keying (FSK) notification signals. With the phone in
standby, open the menu, and select Global Setup . Select Voice Mail Tone , and
choose Off if your service uses FSK signals; if your service uses SDT signals,
choose On .
Entering your Voice Mail Access Number
With the phone in standby, open the menu and select Global Setup .
Select Edit Voice Mail , then enter the access number (up to 20 digits) from
your voice mail service. If you need the phone to wait between parts of the
access number, press rEdial/PausE to insert a two-second pause. (You can
insert as many pauses as you want, but each pause counts as a digit.)
Press
MEnu/sElEcT when you’re finished; the phone overwrites any previously-
saved number.
Getting your Messages
When you have new messages, appears in the display. Press MEssagE/
MuTE ; the phone automatically dials the saved access number.
Resetting the Message Icon
After you listen to your messages, the message icon turns off. If it doesn’t,
you can reset it: With the phone in standby, open the menu and select Global
Setup ; select VMWI Reset , then select Yes .
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, check this section first. If you need
help, call our Customer Care Line listed on the front cover.
General problems Possible solutions
No handsets can make or
receive calls.
xCheck the telephone cord connection.
xDisconnect the base AC adapter for a few
minutes; then reconnect it.
A handset can’t make or
receive calls.
xMove the handset closer to the base.