beautypg.com

Getting started, Installing your phone – Uniden D1660 User Manual

Page 3

background image

English - 3

Installing Your Phone

Charge the Battery

1. Unpack all handsets,

battery

packs, and

battery

covers. If

you need to

remove a

cover, press in on the notch and

slide the cover down and off.

2. Line up the battery connector

with the jack inside the handset;

the connector only fits one way.

3. Push the connector in until it

clicks into place; tug gently on the

wires to make sure the battery is

securely connected.

4. Replace the battery cover and

slide it into place.

5. Use an AC adapter to connect

the power jack on the base to a

regular indoor (120V AC) power

outlet. Connect any chargers the

same way.

6. Place a handset in the base with

the display facing forward. If the

display doesn’t light up, reseat the

handset or connect the base to

a different outlet. For 2 or more

handsets, place each handset in a

charger.

#

Charge all handsets

completely (about 15 hours)

before using.

Connect the Telephone Cord

Use the telephone cord to connect

the

TEL LINE

jack on the base to a

standard telephone wall jack.

Test the Connection

1. Pick up the handset and press

Talk

. The handset sounds a dial

tone, and the display shows

Talk

.

– If you don't hear a dial tone or

the display says

Check Tel Line,

check the connection between

the base and the phone jack.

2. Make a quick test call. (Press

End

to hang up.)

– If you keep hearing a dial tone,

change to pulse dialing.

– If there’s a lot of noise, check

for interference (see p. 13).

3. Test all handsets the same way. If

you can't get a dial tone, move the

handset closer to the base.

Changing to Pulse Dialing

Your phone uses tone dialing by

default. If your phone company uses

pulse dialing, you need to change

your phone’s dial mode.
1. Press

MEnu/sElEcT

and choose

Global Setup

.

2. Select

Dial Mode

then

Pulse

. You’ll

hear a confirmation tone.

To send DTMF tones during a call

(e.g., for an automated response

system), press

*

to temporarily

switch to tone dialing. When you

hang up, the phone automatically

returns to pulse dialing.

GETTING STARTED