Uniden MHS050-2 - Manual (Page 9)

E-9 Uniden MHS050-2 Owner’s Manual
no. description no. description
17 TX LO/HI Power Indicator 23 US Channel Mode
18 Canada Channel Mode 24 International Channel Mode
19 Triple Watch Indicator 25 Battery Level Indicator
20 “A” Channel Indicator 26 Charging Cradle
21 Memory Indicator 27 Charging Contacts
22 Keylock Indicator 28 Charging Indicators
getting starteD
ConneCting poWer
The dual charging cradle uses a single AC adapter.
1. Connect the AC adapter to the DC 12 V jack on the rear of
the charging cradle.
2. Plug the other end of the AC adaptor into a 120 VAC wall
outlet.
NOTE
• The drop-in charger is not water proof. Ensure
the radio is dry before connecting to the charger.
• Don’t use the charger when the ambient
temperature is below 32ºF (0ºC) or above 113ºF
(45ºC).
install the battery paCk
Your radio uses the supplied NiMH battery pack. To install the
NiMH battery:
1. Make sure the radio is off.
2. Use a screwdriver to turn the battery compartment screw
counterclockwise and then lift up and remove the battery cover.
3. Put the NiMH battery pack in the battery compartment, applying
the battery contacts to the lower charge contacts. Be sure
to follow the instructions written on the battery pack’s label.