Uniden MHS050-2 - Manual (Page 12)

E-12 Uniden MHS050-2 Owner’s Manual
condition % duty cycle
Transmit (Low Power) 5%
Receive 5%
Stand-by 90%
attaChing the beltClip
To attach the belt clip:
Slide the belt clip until it snaps into place.
To remove the belt clip:
Press and hold down the belt clip lock while simultaneously
sliding it upward until it releases.
using the Carabiner Clip
Use the carabiner clip to conveniently secure the radio to a belt or strap.
operation
In order to get the most out of your new radio, read this owner’s
manual completely before attempting to operate the unit.
basiCs
Power On/Off
1. Press and hold to turn the radio ON. A channel number
and battery level should appear on the display.
2. Press and hold to turn the radio OFF.
Volume
The volume level can be adjusted from U0
(no volume) to U 7 (maximum volume).
Press VO or VO to increase or decrease
the volume level. U shows on the display and
the current volume level flashes.
HI