Universal Remote Control (URS) TX-1000 - Manual (Page 14)

System Settings
You can set your Medius to display the Low Battery warning at a power
level between 0% and 20% (in 5% increments).
Calibrating the Touch Screen
If you find that your Medius is not responding to finger presses accurately,
you can calibrate the touch screen with this setting. It works like this:
1. Press the TOUCH button on the SETUP screen.
2. The screen changes and displays a small + symbol in the top left
corner.
3. Press the + symbol with the tip of your fingernail as accurately as
you can.
4. The + symbol now moves to the top right corner, then the bottom
left corner, the bottom right corner and finally the center of the
screen. Each time, press the + symbol as accurately as you can.
5. When the process is complete, the screen will return to the
SETUP screen.
Anytime you want, you can exit the Calibration screen by pressing the
WATCH button.
Page 11
M EDIUS O WNERS M ANUAL
Once the WARN row
has been activated,
use the LEFT and
RIGHT arrow keys to
cycle through the
available battery level
settings (0%, 5%,
10%, 15% or 20%).
To exit without sav-
ing any changes you
have made, press
EXIT.
The current battery
power remaining is
displayed here.
To SAVE any
changes you have
made, press
SAVE.
To activate the
battery low warn-
ing row, press the
WARN button.
The amount of
available memory
left to utilize is dis-
played in this row.