Universal Remote Control (URS) TX-1000 - Manual (Page 13)

Page 10
M EDIUS O WNERS M ANUAL
Light Settings
You can adjust the backlighting of the remote in three additional ways:
1. You can turn on/off the LCD backlighting.
2. You can turn on/off the hard button backlighting.
3. You can select the amount of time the lighting stays on after the last button
press.
Sound Volume
Your Medius beeps whenever a button is pressed. However, you can adjust
the volume to any level you like by adjusting the volume control here.
To exit without sav-
ing any changes
you have made,
press EXIT.
Once the LCD row is
activated, change
whether the backlight-
ing is on or off by
pressing this button.
Once the BUTTON
row is activated,
change whether
the backlighting is
on or off by press-
ing this button.
Once the TIMER row
is activated, change
the amount of time
the backlighting will
stay on by using the
LEFT and RIGHT
arrow keys.
To SAVE any
changes you have
made, press
SAVE.
To activate LCD
backlighting, first
press this button.
To activate the hard
button backlighting,
first press this button.
To activate the
TIMER setting, first
press this button.
To exit without sav-
ing any changes
you have made,
press EXIT.
Adjust the volume of
the beep by using the
LEFT and RIGHT
arrow keys.
To SAVE any
changes you have
made, press
SAVE.