Universal Remote Control (URS) TX-1000 - Manual (Page 11)

Setting the TIME
You can correct the time displayed by changing the settings on this screen.
Setting the LCD
With these settings, you set the screen’s appearance when the Medius is not
in use. You can select either a blank or constant LCD display. Additionally,
you can control the contrast of the screen and the color of the backlighting.
Page 8
M EDIUS O WNERS M ANUAL
To activate the
AM/PM setting,
press this button. . After activating
AM/PM, press this
button to change
AM/PM.
To activate the
HOUR setting,
press this button.
To activate the
MINUTE setting,
press this button.
After activating
them, change the
HOURS or MIN-
UTES by observing
these buttons and
adjusting with the
LEFT and RIGHT
arrow keys.
To exit without sav-
ing any changes you
have made, press
EXIT.
To SAVE any
changes you have
made, press SAVE.
To activate the LCD
On/Off setting,
press this button. .
After activating LCD
On/Off, press this
button to change
whether the LCD is
displayed when not
in use.
Press the TIMEOUT
button if you wish to
change how much
time must pass
before the Medius
turns the LCD off.
To activate the
CONTRAST setting,
press this button.
For COLOR set-
tings, see the next
page.
After activating
change the CON-
TRAST by observing
this button and
adjusting with the
LEFT and RIGHT
arrow keys.
To exit without sav-
ing any changes you
have made, press
EXIT.
To SAVE any
changes you have
made, press SAVE.