Uniden DS73 - Manual (Page 13)

9
INST
ALLA
TION & ADJUSTING
▼ Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1. Plug the AC adaptor into the base.
2. Plug one end of the telephone line cord into the TEL LINE jack at the back of
the base.
3. Snap the wall mount adaptor into the bottom of the base as shown, making
sure that the the cords are aligned into the slots provided.
4. Plug the AC adaptor into a standard 240V AC wall outlet. Plug the other end of
the telephone cord into a standard telephone jack on the wall.
5. Align the mounting slots on the base with the mounting posts on the wall.
Push in and down until the phone is firmly seated.
6. Raise Antenna.
WALL INSTALLATION
Use only the Uniden AC
adaptor supplied with this
phone plugged to
uninterrupted power supply.
Place the power cord so that
it does not create a trip
hazard or where it could
become chafed
and create a fire or electrical
hazard.
3
AC
Adaptor
1
2
6
4
5
4
Line in
From
Telephone
Jack