Uniden DS73 - Manual (Page 12)

8
1. Plug the AC adaptor cord into the 9V DC input jack on the back of the base.
2. Plug the AC adaptor into a standard 240V AC wall outlet.
3. Plug one end of the telephone cord into the TEL LINE jack on the back
of the base.
4. Plug the other end of the cord into the
telephone jack on the wall.
5. Set the base on a desk or tabletop with the
keypad facing up or down then place the
handset into the base. Raise the antenna to
a vertical position.
6. Place handset on base to charge the batteries
(See page 13 for CHARGING
THE BATTERY PACK)
AC
Adaptor
Line in
From
Telephone
Jack
TEL LINE
DC IN 9V
1
2
3
4
DESK/TABLETOP INSTALLATION
Before connecting your
phone line, fully charge the
Nickel- Metal Hydride battery
pack for 15-20 hours.
Place the power cord so
that it does not create a trip
hazard or where it could
become chafed and create a
fire or electrical hazard.
Use only the Uniden AC
adaptor supplied with this
phone plugged to
uninterrupted power supply.