Uniden BC370CRS - Manual (Page 24)

24
Using the Radio Controlled Clock
Setting the Alarm Clock
Follow these steps to set the alarm time:
1. Slide the TIME switch to Alarm Set.
The hours digits flash.
2. Press ▲ or ▼ to change the hour by one hour or press the number keys to
select the present hour. Then press E/PGM. The minutes digits flash.
3. Press
▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press E/PGM.
The seconds reset to 00, the
AM/PM icon flashes.
4. Press
▲ or ▼ to move from AM to PM and back. Press E/PGM to make
your selection. To lock in the alarm time, move the slide switch to Clock.
To have the BC370CRS alert you at the
selected time, slide Off/Radio/Tone to either
Radio or Tone and turn off the scanner. If
you set the selector to Radio, the alarm will
sound with the selected audio source
(AM/FM, Scanner, or Weather). If you set the
selector to Tone, the scanner will sound a
tone at the set time. To silence the alarm,
slide Off/Radio/Tone to Off. If you do not turn
off the alarm, it will sound for 20 minutes,
then reset to alert you again the following day.
Using Snooze
When the alarm sounds, press the snooze
bar to silence the alarm for 5 minutes.
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 24