beautypg.com

Ctcss operation 45, Installing the ctcss board 45, Ctcss operation installing the ctcss board – Uniden BC9000XLT User Manual

Page 45: Ctcss operation

background image

CTCSS Operation

This section applies only if you are installing and using an optional
CTCSS Tone Board with your scanner.

Installing the CTCSS Board

Installing the CTCSS Tone Board is a simple procedure, and requires only
a few minutes following the steps below.

CAUTION:

Be sure to turn the scanner off and disconnect the power

cord before attempting to open the scanner.

1. Remove the five screws from the top cover.

2. Carefully lift the cover up from the back of the unit and turn it to

the left - being careful not break the speaker wire.

3. Stand the cover on its left side panel.

(Continued, next page)

45

Lift