Uniden BC9000XLT - Manual (Page 41)

Using Auto Recording
The Auto Recording feature allows you to automatically tape record
activity from any channel of your scanner. When scanning stops on the
assigned channel, the recorder records the broadcast.
Before using the Auto Tape feature, connect the scanner to a tape
recorder. (See page 6.)
Use these keys:
1. Press
s
.
2. When the scanner stops on a
channel you want to record,
press
m , then press x .
Note: You can also select the channel manually.
To select other channels for recording, repeat steps 1 and 2.
To record transmissions, you need a tape recorder with Remote and
Microphone inputs.
1. Connect the REMOTE jack of your tape recorder to the AUX jack
on the rear of the BC9000XLT. This can be used to start and
stop your recorder.
2. Put a tape in your recorder, and put it in the Record mode.
3. Press
s
.
41
COUNT AUX STATUS
SCAN
SRC
MANUAL
AUTO
PROG SEND ALPHA
HOLD
LIMIT
MEM SHIFT
LINE EXT SP
PRI TURBO CTCSS DATA
BRI DIM OFF
AM NFM WFM
5KHz 12.5 KHz 25KHz
CLR 50KHz HI-CUT
L/O DELAY ATT
1 2
4
7
5
8
0
3
6
9
E
A
F
B
G
C
H
D
I
E
J
FREQ CHAN
LOCK
SQUELCH
VOLUME
OFF
BC XLT 9000
TWIN TURBO
LINE EXT SP
COUNT AUX STATUS
PROG SEND ALPHA
MEM SHIFT
SCAN MANUAL
BRI DIM OFF
AM NFM WFM
5KHz 12.5 KHz 25KHz
CLR 50KHz HI-CUT
1 2
4
7
5
8
0
3
6
9
E
FREQ CHAN
LOCK
Status, Scan, and Numeric Keys,
Rotary Tuning Controls, Line jack
Bank A P ch 1
482.7625MHz
Record ch 1
482.7625MHz