Uniden BC9000XLT - Manual (Page 21)

1. Press
P
...
Then press Z .
2. Enter the channel number...
Note: You must select a
programmed channel.
Example: Channel 1
Then press
h
. The Alpha
Edit Screen appears.
3. Turn the Rotary Tuner left/right
to choose a letter from the
upper line of characters.
Example: “L”
Press
h
for uppercase
characters,
l
for lowercase
letters.
Repeat to choose more characters. You can enter up to 16 characters.
Note: Press
U
to move the edit cursor on the lower line to the
right.
Press
S
to move the edit cursor to the left.
4. Press
e
to program the
Alpha entry into the channel.
You can program channels 1 through 250 with alpha characters. If you try
to program channels above number 250, the scanner returns to the
“SELECT CHAN” screen.
Press s , m , or P to exit the Program Alpha mode.
To display the alpha characters, press
Z
while in the Scanning or
Manual Mode.
21
ALPHA or CTCSS
Select
Select chan 8
from 1 to 500
1
from 1 to 500
56789 /()& ch 1
LMNOPQRSTU ch 1
LMNOPQRSTU ch 1
L
Bank A P ch 1
L o c a l Po l i c e