Uniden DECT2180 Series - Manual (Page 19)

Using Call Transfer
To... From the base From a handset
transfer a
call
Press FIND HANDSET/INTErCOM
to put the call on hold. The
base pages all other stations
automatically.
1.
Press CLEAr/INTErCOM to put
the call on hold.
Select the station you want
to transfer the call to (select
All to page all the stations).
1.
2.
When the other station accepts the call, you'll be disconnected,
but you can join the call again.
cancel a
transfer
Press SPEAKEr to return to the
call.
Press TALK/FLASH to return to the
call.
accept a
transferred
call
To answer the page & speak to the transferring handset, 1.
press FIND HANDSET/INTErCOM . press CLEAr/INTErCOM.
To accept the call, 2.
press SPEAKEr . press TALK/FLASH .
Using the Intercom
Here are some things you need to know about using the intercom:
Whenever the phone is in standby, you can make an intercom call
between stations without using the phone line.
You can make an intercom call from any station, but only two
stations can be in an intercom call at any time.
If an outside call comes in during an intercom call, the phone
shows the CID information. If another station hasn't answered yet,
the phone cancels the page so you can answer the incoming call.
To... From the base From a handset
make an intercom
page
Press FIND HANDSET/
INTErCOM . (All
stations are paged
automatically.)
Press CLEAr/INTErCOM .
Select the station you want
to talk with, or All to page all
stations at the same time.
1.
2.
cancel a page
Press FIND HANDSET/
INTErCOM.
Press END .
answer an intercom
page
Press CLEAr/INTErCOM or TALK/
FLASH .
leave an intercom call Press END .
answer an outside call
during an intercom
call
Press SPEAKEr. Press TALK/FLASH .


