Uniden DECT2180 Series - Manual (Page 12)

0
Using Your Phone
To... From the handset From the handset speakerphone
make a call: Dial the
number, then
Press TALK/FLASH . Press SPEAKEr .
answer a call Press TALK/FLASH . Press SPEAKEr .
hang up Press END or put the handset in the cradle.
switch between the
speaker & earpiece
Press SPEAKEr .
mute the microphone
during a call
Press MESSAGES/MUTE . Press again to turn the
microphone back on.
put a call on hold
Press CLEAr/INTErCOM . After 5 minutes on hold, the
call will be disconnected.
return to a call on hold Press TALK/FLASH . Press SPEAKEr .
mute the ringer for this
call only
While the phone is ringing, press MESSAGES/MUTE .
Using the Base Speakerphone
The base speakerphone lets you use the following features:
Answer a call Press SPEAKEr .
Hang up Press SPEAKEr .
Put a call on hold Press FIND HANDSET/INTErCOM twice.
Return to a call on hold Press SPEAKEr .
Changing the Volume
You can set the volume of the ringer and speaker separately for the
base and each handset; you can also set the earpiece volume on
each handset. For each item, press Up to make it louder or doWN to
make it softer. The available volume levels and how change them are
listed below:
Change the When On the base On a handset
ringer
volume
the phone is in
standby
select Off, Low,
Medium, or High
select Off, Low,
Medium, or High