Teac CR-H500NT - Manual (Page 51)

ENGLISH
51
Every time you press the TIMER button on the
remote control unit, the timer mode changes as
follows.
Timer off
Timer daily
Timer REC once
Timer REC daily
Timer Playback
1 Select “Timer daily” by pressing the TIMER
button on the remote control unit.
The timer indicator “ ” lights on the display.
2 Prepare for the timer playback.
Adjust the volume, tune in a station, etc.
3 Press the STANDBY/ON button to put the unit in
standby mode.
Everyday when the On time is reached, the unit will
turn on and start playback, and when the Off time is
reached the unit will return to standby.
When you use iPod touch as the source for the timer,
do not turn it off. It will not be turned on when the On
time is reached.
Timer Operation
Timer Recording
You can set the various external USB storage devices such
as USB flash memory to record programme at the desired
time.
Connect the external USB storage device to the unit
beforehand.
1 Select “Timer REC once” or “Timer REC daily”
by pressing the TIMER button on the remote
control unit.
The timer indicator “ ” and “ ” light on the display.
2 Prepare for the timer recording.
Tune in a station, etc.
3 Press the STANDBY/ON button to put the unit in
standby mode.
One minute before the set On time, the unit turns on
and starts recording at the On time.
When the Off time is reached the unit will return to
standby.
Timer off
When not using the timer, press the TIMER button
on the remote control unit to select “Timer off”.
The timer indicator “ ” disappears from the display.
EN_CR-H500NT_T_C.indb 51 EN_CR-H500NT_T_C.indb 51 09.10.6 5:31:46 PM 09.10.6 5:31:46 PM