Toshiba MK6017MAP User Manual

Page 84

360014937

- 584 -

WORD 89: The time period for Security Erase Unit command completion shall be set.

TIMER

ACTUAL VALUE

0 Not

specified

1-254

( Timer

2 ) minuites

255

> 508 minuites

WORD 90: Reserved

WORD 91: Current Advanced Power Management setting

bit 15-8 Reserved
bit 7-0 Current Advanced Power Management setting set by Set Features Command.

The default value for this WORD is0080h.

WORD 92: Master Password Revision Code

the value of the Master Password Revision Code set when the Master Password was last change. Valid
values are 0001h through FFFEh. A value of 0000h or FFFFh indicates that the Master Password Revision
is not supported.

WORD 93: Hardware configuration test results

bit 15

0 (Fixed)

bit 14

1 (Fixed)

bit 13

1=device detected CBLID- above V

0=device detected CBLID- below V

bit12-8

Device 1 hardware reset result. Device 0 shall clear these bits to zero.
Device 1 shall set these bits as follows :

12 Reserved.
11

0=Device 1 did not assert PDIAG-.
1=Device 1 asserted PDIAG-.

10-9 These bits indicate how Device 1 determined the device number:

00=Reserved.
01=a jumper was used.
10=the CSEL signal was used.
11=some other method was used or the method is unknown.

1 (Fixed)

bit 7-0

Device 0 hardware reset result. Device 1 shall clear these bit to zero.
Device 0 shall set these bills as follows:

7 Reserved.
6

0=Device 0 does not respond when Device 1 is selected.
1=Device 0 responds when Device 1 is selected.

0=Device 0 did not detect the assertion of DASP-.
1=Device 0 detected the assertion of DASP-.

0=Device 0 did not detect the assertion of PDIAG-.
1=Device 0 detected the assertion of PDIAG-.

0=Device 0 failed diagnostics.
1=Device 0 passed diagnostics.

2-1

These bits indicate how Device 0 determined the device number:
00=Reserved.
01=a jumper was used.
10=the CSEL signa was used.
11=some other method was used or the method is unknown.

1 (Fixed)