Toshiba 26A3000A - Manual (Page 18)

18
Using the TV’s features
Using the SRS WOW surround sound
SRS WOW is a special combination of SRS Labs audio
technologies that creates a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV’s
audio will sound fuller, richer and wider.
WOW consists of three features; SRS 3D, FOCUS, and
TruBass, being turned on.
1
Press
M, then press I or i to display SOUND menu.
2
Press u or U to select WOW, then press Q.
3
Press u or U to select an item you want to adjust, then
press I or i to adjust the settings as required.
SRS 3D: To turn the surround effect On or Off.
FOCUS: To turn the vocal emphasis effect On or Off.
TruBass: To select the desired bass expansion level
(Off, Low or High).
Notes:
• If the broadcast is monaural, the SRS 3D effect does not
work.
• WOW, SRS and l
®
symbol are trademarks of SRS Labs,
Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The SRS WOW effect is active only when the sound outputs
from the speaker.
Using the stable sound
The Stable sound function limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
1
From the SOUND menu, press u or U to select Stable
sound on the 2nd page.
2
Press I or i to select On or Off.
Note:
The Stable sound effect is active only when the sound outputs
from the speaker.
Using the bass boost
1
Press
t to display Bass boost level.
2
While the Bass boost display is on the screen, press I
or i to adjust the Bass boost level.
3
To turn off the Bass boost, press
t to display Bass
boost Off.
Note:
The Bass boost effect is active only when the sound outputs
from the speaker.
Other features settings
Selecting the timer menu
The Timer is especially useful if you want the TV to turn itself
on or off after a selected period of time.
1
Press
M, then press I or i to display the TIMER menu.
2
Press u or U to select the required timer mode (Sleep
timer (Turn off the TV) or On timer).
The timer display will set by 10 minutes, up to 12 hours
and 50 minutes.
3
Press the Number buttons (0-9), I or i to set the On or
Off delay time, e.g. on in 30 minutes and On timer
Position 3 selected.
4
Press
P to exit the menu. When setting the On timer,
press u or U to select the On timer Position and enter
the program position number you want to watch. Set the
Standby mode by pressing
J on the remote control or 1
on the TV.
Activation of the Timer is indicated by the green “On-
timer indicator”, on the front of the TV (- page 8).
Notes:
• The TV will automatically turn itself off after approximately 2
hours if you do not operate the TV after turned on by on timer
function.
• If you press and hold I or i to set the On or Off delay time,
the timer display will set by 30 minutes, up to 12 hours 30
minutes.
Using the auto format
When the TV receives a true HDMI signal picture and the auto
format is On, it will automatically be displayed in HDMI
signal format, irrespective of the TV’s previous setting.
Treble
Balance
WOW
Bass
Dual
MTS
SOUND 1/2
Auto
Dual 1
0
0
0
OK
Back Watch TV MENU EXIT
MENU Back Watch TV EXIT
WOW
TruBass High
SRS 3D Off
FOCUS On
MENU Back Watch TV EXIT
SOUND 2/2
Stable sound Off
Bass boost 70
Bass boost Off
On timer Position
On timer
Sleep timer
TIMER
MENU Back Watch TV EXIT
00:00
00:00
01