Toshiba 26A3000A - Manual (Page 17)

17
Using the TV’s features
1
From the PICTURE menu, press u or U to select
Cinema mode.
2
Press I or i to select On or Off.
Note:
When a DVD movie with subtitle is playing back, this mode
may not work correctly.
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
1
Press
M, then press I or i to display the SOUND menu.
2
Press u or U to select MTS, then press I or i to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch
s to e Mono (monaural).
Selecting the dual 1 or dual 2 mode
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
1
Press
M, then press I or i to display the SOUND menu.
2
Press u or U to select Dual, then press I or i to select
Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is
not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
Selecting the stereo programs
1
When a stereo program is received, d Stereo appears.
2
Press
s to select the stereo/monaural mode. d
Stereo and e Mono appear cyclically on the screen.
Selecting the bilingual programs
1
When a bilingual program is received, e Dual appears.
2
Press
s to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1
From the SOUND menu, press u or U to select an item
you want to adjust.
2
Press I or i to adjust the settings as required.
Dual
MTS
SOUND 1/2
MENU Back Watch TV EXIT
Auto
Dual 1
Treble
Bass
0
0
0
Balance
WOW
OK
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j Dual 1 Sub I sound Main sound
J Dual 2 Sub II sound Sub sound
e Mono Main sound —
Selection I Pressing i
Bass weaker stronger
Treble weaker stronger
Balance decreases the right
channel decreases the left
channel
Stereo
Dual 1
Bass 0