TANDBERG Video Conferencing System 7000 - Manual (Page 17)

TANDBERG Videoconferencing System
17
Installation
NOTE
6. LAN cable
• To use the system on LAN, connect a LAN cable from the ‘Ethernet’ connector on the system to your LAN.
5a. ISDN cables - using BRI interface
Connect the ISDN cables to the ISDN sockets (S/T-interface) provided by the service provider. Your main number
will be the number associated with the socket to which ISDN cable number 1 is connected.
T HE SYSTEM DOES NOT HAVE A BUILT - IN NETWORK TERMINATOR . I F YOUR WALL SOCKET PROVIDES YOU WITH AN ISDN U- INTERFACE , YOU WILL NEED
AN NT1 BETWEEN YOUR SYSTEM AND YOUR ISDN LINE , SEE A PPENDIX 1.
5b. ISDN cable - using the PRI interface
If you are using the PRI interface, the E1/T1 cable should be connected to a CSU (Channel Service Unit). You will
need a CSU between your system and the PRI line from your network provider, see Appendix 3.
5c. Other networks - using the External Network interface
If you are using other networks, please refer to ‘External Network Settings’ and ‘Appendix 2’.