Technicolor - Thomson TG784 - Manual (Page 72)

E-DOC-CTC-20080421-0010 v1.0 66
7 Internet Security
4 The Web Filtering Activation page appears. Under License Type, select:
30-days evaluation if you first want evaluate this feature.
Standard if you have already purchased a license key. The License key box appears as soon as you
select this option. Type the license key that you received from your ISP in this box.
5 Click Apply.
Option 1: content-based filter (combined with the address-based filter)
If you want to use the content-based filter:
1 Browse to the Thomson Gateway Web Interface .
2 On the Toolbox menu, click Web Site Filtering.
3 On the Location bar , click Configure.
4 Make sure that the Use Content Based Filter check box is selected.
5 Configure the content based filter. For more information, see “7.2.1 Configuring The Content-based
Filter” .
6 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.
For more information, see
“7.2.2 Adding Rules For The Address Based Filter” .
Option 2: address-based filter only
Take this option, if you only want to use the address-based filter or content filtering is not available on your
Thomson Gateway.
Proceed as follows:
1 Browse to the Thomson Gateway Web Interface .
2 On the Toolbox menu, click Web Site Filtering.
3 On the Location bar , click Configure.
4 Make sure that the Use Address Based Filter check box is selected.
5 In the Action for Unknown Sites, select:
Allow as the default rule if you want to allow access to all web sites and manually specify which web
sites may not be accessed.
Block as the default rule if you want to deny access to all web sites and manually specify a number of
web sites that may be accessed.
6 Click Apply.
7 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.
For more information, see
“7.2.2 Adding Rules For The Address Based Filter” .