Toshiba pmn - Manual (Page 13)

25 24
LOCK
SD Memory Cards are provided with
a write-protect switch. When this
switch is moved downward, further
recording on the card is disabled, to
protect any images and data already
on the card. When in this status, no
further images can be recorded on
the card, and images already on the
card cannot be erased.
The LCD monitor will display
“WRITE PROTECT”.
Loading and Removing Memory Cards
Slide the memory card door release
to open the card door.
Slide the memory card door release
to open the card door, and pull out
the memory card.
Close the memory card door.
Insert the memory card.
¶ Slide in the card until it stops with a
secure click.
¶ Be careful to insert the memory card in
the correct direction.
¶ Press the edge of the memory card in
slightly before pulling out.
Attach the supplied hand strap as shown.
Write Protect Switch
(SD Memory Cards only)
2
1
3