TC electronic SDN BHD x32 - Manual (Page 13)

OPERATION
11
Input Signal Monitor LEDs
The blue LOCK SIG LEDs normally indicate the current
lock state for each of the input sections. However, these
LEDs can also be used as input meters for these
sections. Press to activate.
Security Lock
To avoid unintended operation of the front panel controls,
these can be locked.
- Press once to lock
- Press and hold to unlock
Monitor level, and power switch cannot be locked.
FORMAT CONVERTER | PATCHBAY | FIREWIRE IO
digitalkonnekt x32
3-4 3-4 3-4 1-2 1-2 1-2 5-6 5-6 5-6 7-8 7-8 7-8
adat adat adat mon mon mon setup/util scenes aes/spdif/tos in adat in firewire in master clock aes+spdif+tos aes+spdif+tos aes+spdif+tos
SRC SPDIF TOS NS 1-8
44.1k
clock rate
aes
/spdif
monitor LEDs
dual wire XLR
hold to select input
security
lock device
adat
monitor
+phones
WCK in
firewire
INT
48k
x2
x4
TOS IN 5/6
FRONT
aes/spdif clock master
DS 9-16
LOCK SIG LOCK SIG LOCK SIG
SEL
1/2 1/2 1/2
3/4 3/4 3/4
5/6 5/6 5/6
7/8 7/8 7/8 SRC
HOLD TO STORE SCENE
input signal
HOLD TO UN-LOCK
192kHz fs
AES pro out
1
2
3
4
1-2 1-2 1-2
3-4 3-4 3-4
5-6 5-6 5-6
7-8 7-8 7-8
adat
1-8
adat
1-8
adat
1-8 P
setup/util sce
monitor LEDs
dual wire XLR
security
lock device
HOLD
input signal
HOLD TO UN-LOCK
192kHz fs
AES pro out
P
Setup/Util
Consider this section the master section of the format
converter.
192 kHz fs
With this option selected, 4 input channels of AES signal
at 192 khz on dual wire XLR can be handled. Channels
are distributed as follows:
AES 1/2 : Channel 1 Left
AES 3/4 : Channel 1 Right
AES 5/6 : Channel 2 Left
AES 7/8 : Channel 2 Right
Beware that SPDIF or TOS signals are
unavailable in 192 kHz mode!
AES - (AES or SPDIF Status bits)
This key allows you to switch between sending AES
(professional) or SPDIF (consumer) status bits on AES
outputs.