Turbosound ASPECT TA-500 SYSTEM TA-500HDP - Manual (Page 53)

user manual
TA-500
TA-500 user manual
Page 53
DSP processing
Input Channels
Gain
LMS-D26
In A Gain
0.0dB
a b c
a
Knob A: Gain, adjustable in 0.2dB steps from –80 dB to +20dB
Delay
LMS-D26
In A Delay
1.50ms
a b c
a
Knob A: Delay, adjustable in variable steps from 0 to 400ms
The delay parameter is adjustable in fine steps at low values; the adjustment becomes
progressively coarser as the value increases. The velocity sensitive Parameter Knobs
therefore provide accurate setting of driver offset delays (typically below 10ms) and rapid
setting of longer system alignment delays.