Tyco InfoProx IPO200 - Manual (Page 2)

Physical
Size
86 x 86 x 22mm (3.4” x 3.4” x 0.87”)
Weight 222.7g (7.9oz) with connectors
Housing Flame retardant polycarbonate containing
fully encapsulated electronics.
Colour Dark Grey
Power
- Voltage
9 – 15Vdc
- Current
Consumption
140mA (passive), 250mA (peak)
Backup Battery Rechargable Lithium battery giving
database backup for over 3 months.
Environmental
- Temperature
-10º to 50ºC (14º to 122ºF)
- Humidity 95% non condensing
LED Indicators Three high intensity LED indicators red,
amber and green
LCD Indicators Two line by 16 character supertwist LCD
with backlight
Keypad 12 character, standard layout, tactile
response keypad.
Functionality
Inputs
Four analog inputs (Transguard protected)
(Door Position, Lock Position, REX Button,
Spare)
Outputs Two current limited open collector outputs
(Door Lock, Unused – for future use)
Memory
1 MB battery backed SRAM
Database
- Cardholders
Storage of up to 197,000 cardholders at
the door.
- Transactions Up to 50,000 transactions in offline
operation.
Configuration Operational parameters are downloaded
from host computer. Some configuration
setting can also be set using the keypad.
communication interFace
To Exit Reader
RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater
- Connection 2 part screw terminals
To System Host RS485 multidrop cable runs using copper
wire with maximum length of 1.2km
without repeater
- Connection 2 part screw terminals
Product codes
InfoProx IPO200 (125 kHz Proximity)
SPASS-IPO-200-B
InfoProx Reader
SPASS-IPO-200-A InfoProx Reader (US Backplate)
InfoProx IPO210 (MiFare CSN)
SPASS-IPO-210-B
InfoProx Reader
SPASS-IPO-210-A InfoProx Reader (US Backplate)
CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: [email protected]
www.cemsys.com
door control unit installation
The enclosure is designed to mount directly onto a standard
UK or European (French) electrical containment box (American
versions are provided with a compact adapter plate), meaning
that standard conduit and fittings may be used.
remote Programming
Operational parameters, e.g. door open time, are downloaded to
the reader from the host computer. Additionally some parameters
can also be configured via the keypad. InfoProx readers can even
be remotely upgraded, eliminating the need to physically replace
firmware, giving increased system flexibility and efficiency.
card technology
The InfoProx reader (IPO200) uses 125 kHz proximity technology
under license from HID Corporation.
A 13.5 MHz technology (IPO210) option of the reader is available
enabling the InfoProx to read the unique ID of MiFare smart cards
(ISO14443A). The following cards are supported:
Type of Card Read Range (IPO200)
ISOProx® II Card
76mm (3.0in)
ProxCard™ Plus Card 38mm (1.5in)
ProxCard® II Card 76mm (3.0in)
ProxKey™ II Fob
25mm (1.0in)
Kantech 31bit Card 38mm (1.5in)
Type of Card Read Range (IPO210)
MiFare Card
30mm (1.18in)
local database
Provides storage of up to 197,000 cardholders at the door and
is retained in excess of three months without external power.
The InfoProx can also store up to 50,000 transactions in offline
operation.
Built-in diagnostics
Allows testing of LED indicators, LCD display, read head, inputs,
relay, network communications, keypad and database size.
system compatibility
The reader can be used with AC2000 or webEntry access
control systems.
PRODUCT HIgHLIgHTS
CEM/B/124/Rev B
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names
and/or registered trademarks of their companies.
technical sPeciFications