Titan Tool 2000XD - Manual (Page 7)

7
QUICK-START DEMONSTRATION (continued)
VI. Wave the Nail over the Search Coil
a. The Nail will not be detected.
b. The Nail has been "Discriminated Out."
VII. P ress the “DISCRIMINAT I O N -▲”
Three “R”s are now displayed.
VIII.Wave all objects over the
Search Coil
The Nail and Pull-Tab
will not be detected.
The other objects will be detected
with their own distinctive tones.
IX. Press the NOTCH touchpad.
A flashing “R” will appear under the
5¢/PT segment.
X. Press the DISCRIMINATION ▲
touchpad three times.
The flashing “R” will move to the
ZINC segment.
XI. Press the NOTCH touchpad again.
The “R” will appear under zinc.
XII. Wave the zinc penny over the search coil.
The penny is discriminated out.
XIII.Press the DISC ALL-METAL touchpad
The detector returns to ALL-METAL mode. No “R”s are displayed.
All types of metals will be detected.
XIV. Wave the pull-tab over the coil.
XV. Press the ITD touchpad.
An “R” will appear.
XVI.Wave the pull-tab over the search coil again.
The pull-tab (the most recently detected item) is eliminated from detector.
Titan2000MANUAL.qx6 4/22/08 12:29 PM Page 7