Titan Tool 2000XD - Manual (Page 3)

ASSEMBLY
Assembly is easy and requires no tools.
● 1 Position the lower stem (the straight tube)
with the silver button toward the back.
Using the bolt and knurled knob, attach the
search coil to the plastic extension
protruding from the lower stem.
● 2 P ress the button on the
upper end of the lower
stem, and slide the
lower stem into the
upper stem.
Adjust the stem to a
length that lets you
maintain a comfortable upright
posture, with your arm relaxed
at your side, and the search
coil parallel to the ground in
front of you.
● 3 Wind the cable secure l y
around the stem.
● 4 I n s e rt the plug into the
matching connector on the
right underside of the
detector body. Be sure that
the key-way and pins line
up correctly.
Caution: Do not f o rce the
plug in. Excess force
will cause damage.
To disconnect the
cable, pull on the
plug. Do not pull
on the cable.
3
Titan2000MANUAL.qx6 4/22/08 12:29 PM Page 3