Titan Tool 2000XD - Manual (Page 6)

6
QUICK-START DEMONSTRATION
I. Supplies Needed
• A Nail • A Quarter
• A Pull-Tab from a beverage can • A Zinc Penny (dated after 1982)
II. Position the Detector
a. Place the detector on a
table, with the search coil
hanging over the edge. (or
better, have a friend hold
the detector, with the coil
off the ground)
b. Keep the search coil away
f rom walls, floors, and
metal objects.
c. Remove watches, rings and other jewelry or metal objects from hands
and wrists.
d. Turn off appliances or lights that cause electromagnetic interference.
e. Pivot search coil back toward the detector body.
III. Power Up
Press the POWER touchpad.
IV. Wave each Object over the Search Coil
a. Notice a different tone for each
object.
Base Tone: Nail
Low Tone: Pull-tab
Medium Tone: Zinc Penny
High Tone:
Quarter
b. Motion is required. Objects must
be in motion over the search coil to be detected.
V. Press the DISC/ALL METAL touchpad(*)
The detector will beep twice and
“R” will appear under the iro n
indicator.
Quick-Start Demo continued on next page
Titan2000MANUAL.qx6 4/22/08 12:29 PM Page 6