1 schedule setup (sensor) – Toshiba SURVEILLIX KV-KLR User Manual
Page 42

30
4.5.1
Schedule Setup (Sensor)
1. Recording – Toggles to the Recording Window (default).
2. Sensor
– Toggles to the Sensor Window. This window allows you to create schedules for the sensors attached
to the DVR.
3.
Day of the Week – Selects the day of the week for the schedule being made.
4.
Single Selection Mode – Selects all days of the week at once.
5. Special
Day
Recording
– Allows you to create special recording schedules for specific days.
6.
Recording Schedule Window – Displays and allows you to edit the current Recording Schedule.
7. Enable/Disable
– Enabled the selected Sensor for the time period specified.
8. Emergency
Time
– Specifies the amount of time (in seconds) to transmit the video in the Emergency Agent
Software.
9. Emergency
IP – Specifies the IP Address to the send the Emergency Agent video to.
10. Event
– Allows you to define Motion as an Alarm Event, whether to transfer the Alarm Event to the SMS Multi-
site Software, and/or whether to send the video to the Emergency Agent software.
Figure 4.5.1
2
1
6
7
4
5
8
9
10
Figure 4.5.1
KV-KLR Shown
3